How to maintain the organic fertilizer granulator?
The organic fertilizer production line is generally divided into two processes. One is fermentation and the other is granulation. This article focuses on how to make the maintenance of the organic fertilizer granulator. The organic fertilizer granulator is an important part in the entire organic fertilizer production line. That’s because the quality of the granulation affects the shelf life, thereby it will affect the price. Next, Zhengzhou Shunxin Engineering Equipment tells you how to make the maintenance of the organic fertilizer granulating equipment.
1.Keep the work site clean. After testing every time, the leaves of granulation and the residual glue inside and outside should be completely removed. And the glue sand and flying objects scattered or splashed on the organic fertilizer equipment should be cleaned. The exposed surface of the machine should be wiped clean and covered with a corresponding protective cover to prevent the second intrusion of dust.
2.The gears, worm gears and external holes of refueling are lubricated with special butter. The upper and lower gear should be added with butter once every season. You can open the cover of the dynamic gear box and the transmission gear separately to refuel. The sliding surface between the supporting gear box and the hinge joint of the bracket should be frequently dripped with oil for lubrication. The worm gear box and bearings have been filled with transmission grease before leaving the factory, but the gearbox machine should be thoroughly cleaned and replace all the lubricant each year.
3.Always pay attention to the operation of the organic fertilizer granulator, there should be no serious abnormal noise and the sound of metal friction. If an abnormality is found, it should be stopped immediately and checked. It can be used after troubleshooting. If the corresponding inspection cannot be found, the machine cannot be started. If there is sound of metal friction, you can check the gap between the organic fertilizer equipment first.
4.The standard gap between organic fertilizer equipment should be checked frequently. When the organic fertilizer equipment is overhauled, the working gap should be re-measured. And multiple adjustments should be made. It can be used after it meets the standards.